In order to utilize Doppler modalities in an optimal manner, one should both be aware of their potential and respect their limitations. To this end, a variety of technical and physical factors affecting the performance of Doppler devices are discussed: (1) the velocity of propagation limiting the temporal resolution of pulsed systems; (2) intervening tissue that may weaken the echo considerably; (3) the size of the sample volume that could be too small to provide a transvascular mean velocity or too large to discriminate flow in adjacent vessels; (4) the principles of continuous wave mode lacking depth resolution, and pulsed mode being prone to aliasing; (5) the additional complexity of duplex/triplex systems; (6) the tight temporal restrictions of 2-dimensional color mappers which cause poor velocity resolution, and (7) the angle of incidence that needs to be assessed in order to measure absolute velocity and the cross-sectional area that must be measured additionally for the calculation of the volume flow rate. Based on this discussion, some hints on selecting instruments or instrument parameters are given.

Keywords:
Ultrasound, Doppler, Basic physical concepts, Blood flow
This content is only available via PDF.
© 1990 S. Karger AG, Basel
1990
Copyright / Drug Dosage / Disclaimer
Copyright: All rights reserved. No part of this publication may be translated into other languages, reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, microcopying, or by any information storage and retrieval system, without permission in writing from the publisher.
Drug Dosage: The authors and the publisher have exerted every effort to ensure that drug selection and dosage set forth in this text are in accord with current recommendations and practice at the time of publication. However, in view of ongoing research, changes in government regulations, and the constant flow of information relating to drug therapy and drug reactions, the reader is urged to check the package insert for each drug for any changes in indications and dosage and for added warnings and precautions. This is particularly important when the recommended agent is a new and/or infrequently employed drug.
Disclaimer: The statements, opinions and data contained in this publication are solely those of the individual authors and contributors and not of the publishers and the editor(s). The appearance of advertisements or/and product references in the publication is not a warranty, endorsement, or approval of the products or services advertised or of their effectiveness, quality or safety. The publisher and the editor(s) disclaim responsibility for any injury to persons or property resulting from any ideas, methods, instructions or products referred to in the content or advertisements.
You do not currently have access to this content.